Marking Equipment.

MWO 9-2330-392-20-1

person reporting the MWO data will acquire the remaining elements (3&5)

and input all nine into the MMIS.

DATA Elements

Input Data

1. Material Change Number (MCN)

2. MWO Number

3. Unit Identification Code at Battalion Level

4. NSN of End Item

5. Serial Number of End Item

6. USA Registration Number

7. Date of Application

8. Hours Required for Application

9. Software Version

(3) For off-line report, the 3.5 inch disk shall be mailed to the following address:

Commander

TACOM-Warren

ATTN: AMSTA-LC-CIPWM

Warren, MI 48397-5000

b. Marking Equipment.

1. After modification procedures have been completed, mark MWO number

9-2330-392-20-1 in MWO APPLIED block and date applied in DATE

block on MWO identification plate P/N 10930014.

2. To install the MWO identification plate on cargo trailers, locate and drill a

.129 - .133 inch diameter hole in the front cargo body above the shipping

data plate (see figure 9 ). Using a rivet gun, hand-set and pull one rivet

P/N 12449496-1 from inside the cargo box fastening the MWO

identification plate to the front cargo body. Installing the rivet from inside

of cargo box prevents any sharp edges on the inside wall of cargo box.

3. To install MWO identification plate on chassis trailers, locate and drill a

.129 - .133 inch diameter hole in the rear fender above the rear reflector