APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued

Page Title: APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued
Back | Up | Next

Web
www.tpub.com

Home

Information Categories

....

Back
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued

Up
MWO-9-2330-390-35-1 Modification of M1022A1 Dolly Set Positioning Tube Reinforcement Manual

Next
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued

MWO 9-2330-390-35-1

APPENDIX A:

LOWERING DOLLY SET WITH OR WITHOUT SHELTER

AND DETACHING FRONT AND REAR DOLLIES (Con't).

g. Remove rest pin (50) from hole (51) at end of each larger brace (52). Install rest pin in

fourth hole (53) from end of each smaller brace (54).

h. Install two telescopic braces (49) to front and rear drawbars (55 and 39) and top beams

(1) with four detent pins (89).

A-4