REMOVAL-continued

MWO 9-2330-390-25-1

APPENDIX C:

TOP AND BOTTOM BEAM AND HYDRAULIC LIFT

CYLINDER REMOVAL / INSTALLATION (Con't).

NOTE

DO NOT disconnect hydraulic lift cylinder lower connections from suspension link.

6. Swing cylinder back and support utilizing rubber vehicle chocks, NSN 2540-01-052-

6234, P/N MS 52127-2 or equivalent, between cylinder and dolly suspension

structure.

7. Remove cotter pins (15 & 16), flat washers (14 & 17), and clevis pins (13 & 18) from

positioning cylinders (2), top and bottom beam. Discard cotter pins, washers, and

clevis pins.

8. Optional: Lockout brackets (81) may interfere with bottom support beam when

lowered. If needed, lockout brackets may be removed. To do so, remove eight safety

pins (78) from bolts (79). Remove four nuts (80), bolts (79), bottom lockout bracket

(81), four sleeves (82), and top lockout bracket (83) from each end of pivot axle

bracket (8) and axle assembly (7).

C-2