TORQUE VALUES-continued

MWO 5-2330-360-23-1

APPENDIX A (Continued)

TORQUE VALUES - Continued

NOTE

Always us the torque values listed above when specific torque values are not available.

Do not use above values in place of those specified in other sections of this manual; special attention should be

observed when using SAE Grade 6, 7, and 8 capscrews.

'The above is based on the use of clean, dry threads.

· Reduce torque by 10 percent when engine oil is used as a lubricant.

· Reduce torque by 20 percent if new, plated capscrews are used.