Table 5-5. Organizational Troubleshooting

TM 32-5895-342-14&P

Table 5-5. Organizational Troubleshooting- Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

Step 8. Check for defective lighting control box.

Remove and replace defective lighting control box.

Step 9. Check for defective circuit wiring.

Remove and replace defective circuit wiring.

2. NO AC POWER AT CONVENIENCE OUTLETS.

Step 1. Inspect to see if electrical system is disconnected from primary power source.

Connect electrical system to primary power source.

Step 2. Check for circuit breaker in OFF position.

Set circuit breaker to ON position.

Step 3. Check for defective circuit breaker(s).

Remove and replace defective circuit breaker(s).

Step 4. Check for defective outlet(s).

Remove and replace defective outlet(s).

Step 5. Inspect for corroded and loose interconnections.

Clean corroded interconnections. Tighten loose interconnections.

3. ELEVATOR HOIST DOES NOT FUNCTION WHEN CONTROL BUTTON IS DEPRESSED.

Step 1. Inspect to see if electrical system is disconnected from primary power source.

Connect electrical system to primary power source.

Step 2. Check for circuit breaker in OFF position.

Set circuit breaker to ON position.

Step 3. Check for defective circuit breaker.

Remove and replace defective circuit breaker.

Step 4. Inspect for corroded or loose cable connections.

Clean corroded cable connections. Tighten loose connections.

5-13