Chapter 5. ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

TM 32-5985-342-14&P

CHAPTER 5

ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

Section I. TOOLS AND EQUIPMENT

Maintenance Allocation Chart (MAC), Appendix D. Use

5-1. TOOLS AND TEST EQUIPMENT. The tools and

of these items is described in table 5-1 below.

test

equipment

required

and

authorized

for

organizational maintenance are listed in the

Table 5-1. Organizational Maintenance Tools and Test Equipment

NSN

Item

Use

Wrench, allen, 3/8-inch

Remove and/or tighten socket head

bolts.

Wrench, torque, 0-200 foot-pounds

Tighten fastener hardware.

Wrench, torque, 0-600 foot-pounds

Tighten fastener hardware.

6625-00-999-7465

Multimeter AN/USM-223

Perform voltage and resistance

measurements.

the Expendable Supplies and Materials List, Appendix

5-2.

MATERIALS.

The materials required and

F. Use of the materials is described in table 5-2 below

authorized for organizational maintenance are listed in

Table 5-2. Organizational Maintenance Materials Required

NSN

Item

Use

6850-00-597-9763

Trichloroethane

Clean metal parts.

7920-00-356-4694

Brush, bristle

Remove corrosion and other

foreign matter from metal parts.

8010-00-835-2114

Paint, primer, zinc-chromate

Prime coat bare metal parts.

8010-00-297-0560

Paint, enamel, lusterless, olive drab

Finish coat metal parts.

8020-00-245-4509

Brush, paint, flat, 1-inch-wide

Repainting and touchup.

8305-00-222-2423

Cheesecloth, lint-free

Clean metal parts.

9150-00-273-2389

Oil, lubricating, 30 WT

Lubricate bearings and bushings.

Grease

Lubricate pawls, shafts, gears,

cam followers.

5-1