 |
|||
|
|
|||
|
Page Title:
TABLE 1-2. SPECIAL TOOLS AND TEST EQUIPMENT. |
|
||
| ||||||||||
|
|
  CE-1008
D.
SPECIAL TOOLS AND TEST EQUIPMENT - Table 1-2 lists the special tools and test equipment required to
install, check out, operate, and maintain the Antenna System.
E.
CONDENSED DATA
(1) EQUIPMENT SPECIFICATIONS AND OPERATING CHARACTERISTICS Equipment specifications and
operating characteristics are contained in Table 1-3.
(2) SPECIAL DESIGN FEATURES - The special features of the Antenna System are contained in the
following paragraphs.
a.
Antenna and antenna feeds are designed to provide maximum usable signals that the present state
of the art permits. Small sector scanning, about 10 degrees, followed by manual heading of the antenna provides quick,
precise location of a source of uhf radiation in space.
b.
Use of a-c motors and synchros reduces possibility of generating r-f interference and obviates use
of heavy rectifiers.
TABLE 1-2. SPECIAL TOOLS AND TEST EQUIPMENT.
Qty
Description
Manufacturer
Part
Number
1
Box, Tool
Furnished with System
1
Hammer, Plastic Head
Furnished with System
1
Pliers
Furnished with System
1
Wrench, Adjustable
Furnished with System
1
Wrench, Open-End, 1-1/8"x 1-1/16"
Furnished with System
1
Screwdriver, Phillips Head, 8"
Furnished with System
1
Screwdriver, Slot
Furnished with System
2
½ "Drive Extension, 10"
Furnished with System
1
Wrench Set, Allen, 14-Piece
Furnished with System
1
Wrench, Open-End, ¾ "x 7/8"
Furnished with System
1
Wrench, Open-End, 9/16"x ½ "
Furnished with System
1
Wrench, Open-End, 5/8"x ¾ "
Furnished with System
1-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals