Figure 4-1. Dc meter scale test, test setup.

TM 11-6625-1702-35

c. Procedure.

Control

settings

Step

Performance

standard

Test

procedures

No.

Test

equipment

Equipment under test

a. No damage evident or

1 N/A ------------- N/A -------------------- a. I n s p e c t c a s e a n d c h a s s i s

parts missing. Exter-

for damage, missing

nal surfaces intended

parts, and condition

of paint.

to be painted do not

show

metal.

bare

Panel

lettering is

legible.

Note. Touchup painting is rec-

ommended instead of refinishing

whenever practical; screw heads,

binding posts, receptacles, and

other plated parts will not be

painted or polished with abra-

sive.

b. Inspect all controls and b. Screws, bolts, and nuts

mechanical assemblies

are tight with none

for loose or missing

missing.

screws,

belts,

and

nuts.

c. Inspect all connectors, c. No loose or missing parts;

sockets, and recepta-

No damage evident.

cles, and fuseholder

and meter for loose-

ness, damage, or miss-

ing parts.

d. Rotate all panel con- d. Controls

rotate

freely

without binding or ex-

trols throughout their

cessive looseness.

limits of travel.

Figure 4-1. Dc meter scale test, test setup.

4-2