Table 4-2. Organizational Troubleshooting

TM 11-5985-371-12&P

Table 4-2. Organizational Troubleshooting - Continued

.-.--------

Malfunction

Test or Inspection

Corrective Action

--------

.--.

Step 3. Disconnect the antenna wire

from one antenna connector

on the

. Use the multimeter to measure the resistance between the

balun

two antenna connectors

. Reading should be less than 1 ohm.

If normal, go to step 4.

If abnormal, replace the balun (para 4-15).

Use the multimeter to measure the resistance between either antenna

Step 4.

connector

and the outer shell of the rf cable connector

Reading should be infinite (open circuit).

If normal, go to step 5.

If abnormal, replace the balun (para 4-15).

4-13