Table 4-2. Organizational Troubleshooting

TM 11-5985-371-12&P

Table 4-2.

Organizational Troubleshooting

Malfunction

Test or Inspection

Corrective Action

WARNING

If the

antenna is connected to a transmitter, make sure the transmitter is

not transmitting and will not be turned on prior to disconnecting or con-

necting the rf cable and/or entering the area bounded by the safety area

rope.

WEAK OR NO RECEPTION AT THE RECEIVER.

Make sure the rf cable is neither disconnected nor broken.

Step 1.

Connect the rf cable.

Replace the rf cable.

Disconnect the rf cable

from the rf connector

on the balun

Step 2.

. Use the multimeter to measure the resistance between the inner

conductor of the rf connector

to the outer case (bare spot) of the

. The reading should be less than one ohm.

balun

If normal,

go to step 3.

If abnormal, replace the balun (para 4-15).