Disassembly of Double Delta Antenna.

TM 11-5985-371-12&P

(2) Untie the loose end

of the halyard from the cleat

on the balun

clamp

and lower the terminating resistor box

. Disengage the slide hook

on the terminating resistor box

from the eyelet

on the halyard.

on the four lanyards

(3) Unsnap the snaphooks

and disconnect the

from the four lanyards. Remove the three conductor splices

antenna wire loops

on each antenna wire

, and pull the antenna wire through the terminating

resistor box connector. Coil and bind the antenna wires. Untie the four lanyards

. Remove and coil the lanyards. Remove the

from the four antenna stakes

four antenna stakes from the ground, and separate the ground rods.

2-26