Assembly of Double Delta Antenna.

TM 11-5985-371-12&P

(4) When the mast

is upright and the

guys held by person 1 are

taut, being careful not to

tangle the guys, person 2

attaches the red guy

then the white guy

and

last the blue guy

guy stake C

(5) If further adjust-

ment is necessary to bring

the mast more nearly verti-

cal, first slack off the

guys that are too short,

then tighten the guys that

are too long, and finally

tighten the guys that were

slacked off.

k. Assembly of Double Delta Antenna.

(1) Mounting the Balun. Using the balun clamp assembly

and four wingnuts

to the mast

6 feet 6 inches (2 meters) above ground level

, mount the balun

the balun clamp o

same side of the mast

as the terminati ng resistor

stop clamp (para g above).