Click here to make tpub.com your Home Page

Page Title: Location and Description of Major Components
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Back
Diagram
Up
TM-11-5985-371-12-P Antenna AS-3577/GRC (NSN 5985-01-148-1778) Manual
Next
Components of Antenna AS-3577/GRC.

TM 11-5985-371-12&P
1-10. Location and Description of Major Components. Major components of the
AS-3577/GRC are shown assembled for use and briefly described below.
GUY PLATE. Consists of a round steel plate 3 inches (7.6 cm) in diameter. The
center hole fits over the male end of a mast section, and five of the eight outer
holes serve for attaching the four guys and a halyard. Three guy plates are mounted
on the mast.
MAST. The mast supporting the double delta antenna includes a mast base, a 6
inch square plate, insulator, and 16 identical 3-foot (0.92 meter) mast sec-
tions.  When the mast sections are interconnected, the effective length of each sec-
tion is 2.5 feet (0.76 meter).  (See illustration on page 2-8. )
TERMINATING RESISTOR ASSEMBLY. The terminating resistor assembly includes a
600-ohm terminating resistor box, a terminating resistor box stop, and a terminating
resistor box stop clamp which mounts the terminating resistor stop to the mast.
HALYARD. The halyard is a 140-foot (42.7 meter) nylon rope used to raise the
terminating resistor box to the terminating resistor stop. In addition to the rope,
the halyard includes a pulley attached to a snap hook, to attach to the top guy
plate, and an eyelet to connect to the slide hook on the terminating resistor box..
ANTENNA WIRE.  A 500-foot (152.5 meter) roll of AWG #14 antenna wire to
construct the double delta antenna.
CONDUCTOR SPLICE.  Three conductor splices are connected to each of the two
antenna wires to form loops to attach to the antenna rod lanyards and the terminating
resistor box.
LANYARD.  Four 30-foot (9.15 meter) lanyards, consisting of color reflective
orange nylon rope with a thimble and snap swivel at one end, connect the four
antenna rods to the four legs of the double delta antenna.  The lanyards also con-
nect the antenna rod stakes to the safety area rope stakes to support the antenna
rod stakes.
ATENNA  STAKES.  Four antenna stakes assembled by connecting three identical
ground rods, are provided.  The antenna stakes are connected via insulating lanyards
to the four legs of the double delta antenna.  The antenna stakes and the safety
area rope stakes (item
) are identical. Each ground rod is 3 feet long.
Four 50-foot (15.25 meter) guys to support the upper portion of the
RED GUY.
mast.
WHITE GUY. Four 40-foot (12.2 meter) guys to support the center portion of the
mast.
BLUE GUY. Four 31-foot (9.46 meter) guys to support the lower portion of the
mast.
NOTE
Depending on the manufacturer, the guys, items
above,
and
hook, or may have its length
have a red, white, or blue color near the snap
(50, 40, or 31 feet respectively) stamped near the  snap  hook.

Privacy Statement - Press Release - Copyright Information. - Contact Us