NORMAL OPERATION WITH A RADIO

TM 11-5985-370-12

When you reach the INPUT TRANSFORMER, neatly and carefully:

l Connect the 6 inch ground wire on the end of the DISSIPATION CABLE to the

GROUND BINDING POST on the INPUT TRANSFORMER:

Push in the BINDING POST and attach the wire.

l Check to see that the shrunken TUBING SEAL on the end of the DISSIPATION

CABLE is good.

2-16. NORMAL OPERATION WITH A RADIO

The radio set is connected to the HALF-RHOMBIC ANTENNA using the 50'

RADIO CABLE.

NO ADJUSTMENT IS NECESSARY.

After a period of operation, make the following checks:

MAKE SURE THE RADIO SET IS TURNED OFF.

CONDITION OF THE 2 TRANSFORMERS:

ARE THEY LEAKING, CRACKED OR TOO HOT TO TOUCH?

CONDITION OF THE DISSIPATION CABLE:

IS THE CABLE TOO HOT TO TOUCH?

Report any problems to C-E ORG MAINTENANCE.

2-34