RAISING THE ANTENNA-continued

TM 11-5985-362-13

After attachment of GIN POLE, back off from pole and visually verify that GIN POLE TOP PLATE guide is

properly alined. If misalinement has occurred, detach GIN POLE, rotate till properly alined and reattach.

From antenna transit case, obtain TOWER WINCH ASSEMBLY, hammer and two TOWER BASE PINS, and

carry to ANCHOR 6A. Position winch base slot over anchor eye. Rotate winch to directly face antenna

tower with anchor eye crosswise 90'degrees to the slot.

Using hammer, drive two TOWER BASE PINS into the ground until pin heads are securely against the top of

base.

2-43