| ||||||||||
|
|
![]() ![]() TM 11-5985-362-13
·
Using the hole made by the point of the anchor implanted during layout, dig a starter hole 4 inches (10.2 cm) to 8
inches (20.3 cm) deep with the shovel/pick and place one of the 30 inch anchors in the hole.
CAUTION
When installing anchor, use extreme care not to bend antenna coupler bar.
·
Place antenna coupler bar through anchor eye. Using two crewmembers exert a downward pressure on the bar and
rotate clockwise until anchor eye is a maximum of 1 ft. (.3 m) above ground level.
2-21
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |