ANCHOR (6) (RIGHT AND LEFT SIDES)

TM 11-5985-362-13

(3) ANCHOR (6) (RIGHT AND LEFT SIDES)

To locate position for right and left anchors using the BACK and CENTER LAYOUT WIRES proceed as follows:

With a crewmember at each end of the BACK LAYOUT WIRES (marker tag 7), third crewmember picks up SLEEVE

with marker tag 4.

Walk toward ANCHOR 1 (allowing the BACK LAYOUT WIRE to form a "V") until CLAMP NO. 4 is reached on

CENTER LAYOUT WIRE.

Insert SLEEVE with marker tag 4 into CLAMP NO. 4.

Tighten CLAMP wingnut securely.

One crewmember remains at CLAMP NO. 4 to hold wire in place.

Second crewmember proceeds to TOWER BASE to hold SLEEVE with marker tag 5 on arrowhead as pivot point.

Third crewmember obtains two 30 inch anchors from transit case and proceeds to ANCHOR 6.

2-19