Figure 2-2. Antenna AS-2731/GRC partial view, parts location

TM 11-5985-355-13

between MX-9146/GRC threaded stud and the antenna

9146/GRC unit is not aligned with the

mounting bracket per type of setup (fig. 2-4).

frequency radio setting, and the rt unit is

i. Connect control cable assembly CX-13055/GRC

on, arcing may occur which will result in

to J2 connector of NIX-9146/GRC.

burnt connector pins.

i. Connect control cable from the associated rt unit

CAUTION

to free end of CX-13055/GRC connector.

Before connecting CX-13055/GRC to

k. Connect the rf cable from the associated radio

control cable of radio rt unit, be sure

to connector J1 of MX-9146/GRC (fig. 2-5).

your radio rt unit is turned off. If the MX-

2-3