Antenna Adjustment Procedures-continued

TM 11-5985-335-15

Set both receiver meter switches to indicate the rf level of the received signal.

c. Establish voice contact between stations A and B. Use the order wire facilities, if incorporated in the associated

radio sets. Have station B retransmit to station A the signal received from station A.

Station a man at each antenna site and provide telephone communications between each antenna site

and its associated radio set.

Instruct the antenna man at station A to rotate his antenna slowly (±15 degrees off the original position)

to obtain at station A a maximum received rf input level indication. If more than one peak is observed, use the peak of

maximum amplitude.

f. Instruct the antenna man at station A to adjust the antenna tilt angle (using the tilt rope of the tilting assembly) for

a maximum received rf input level indication.

24.4