 |
|||
|
|
|||
|
Page Title:
CHAPTER 2. INSTALLATION AND OPERATION |
|
||
| ||||||||||
|
|
  TM 11-5985-335-15
CHAPTER 2
INSTALLATION AND OPERATION
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
2-1.
Unpacking the Equipment
a. Packaging Data. When packed for shipment, the components and accessories of Antenna AS-1425/GRC are
usually placed in a wooden box and four cartons. A typical packaging diagram for a wooden box is shown in figure 2-1.
b. Packing Dimensions.
The dimensions, volume, weight and contents of the packed containers of the AS-
1425/GRC are given below in the chart:
Container
Dimensions
Volume
Weight
No.
(in.)
(cu ft)
(lb)
Contents
Box 1
58x58x26.5
51.6
258
Reflector
Backmount
Feedhorn
Antenna Adapter (A only)
Guy cable assemblies (yellow coded) (4)
Guy (messenger cable)
Clamp assemblies (10)
Technical manual
Cartons:
2
30x30x10
5.2
51
Waveguide Assembly CG-3307/GRC (2)
3
30x30x10
5.2
51
Waveguide Assembly CG-3307/GRC (2)
4
30x30x10
5.2
51
Waveguide Assembly CG-3307/GRC (2)
5
30x30x10
5.2
51
Waveguide Assembly CG-3250/GRC
Waveguide Assembly CG-3251/GRC (2)
Hanger assemblies (15)
c.
Removing Contents of Wooden Box. Remove the AS-1425/GRC components from the wooden box using the
procedure outlined in (1) through (7) below:
(1) Before unpacking, place the wooden box as near as possible to the mast location.
CAUTION
Do not thrust any tools into the interior of the wooden box or any of its cartons.
Change 2
14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals