Figure 2-19. Spring assembly, exploded view, MK-2044/G.

TM 11-5905-334-34

(5) Slide post out of spring (5).

(6) Remove two screws (9), lockwashers (8), and

washers (7) to release pressure block (6).

(7) Remove three screws (fig. 2-20, item 3) to

separate flange (1) from body (2).

b. Cleaning, Inspection and Repair. Refer to

c. Reassembly.

(1) Insert ball end of cables (4) into reels (3) and

wrap cables around reels.

(2) Turn gearbox assembly (2) upside down and

slip reel over shaft ends.

(3) Place plugs (10) over shaft ends and slide

base (9) over them.

(4) Slip spring assemblies (8) between gearbox

and base and secure with bolts (7), lockwashers (6)

and washers (5).

(5) Replace crank handle on main driveshaft.

2-25. Repair of Lock-out Assembly, MK-2044/G

Figure 2-19. Spring assembly, exploded view, MK-2044/G.

a. Remove bolt (5) and nut (2) to release cable

clamp (1) from turnbuckle (3).

b. Remove bolt (5) and nut (2) to release clevis (4)

from turnbuckle (3).

Figure 2-20. Guy control reel exploded view, MK-2044-G.

2-25