| ||||||||||
|
|
![]() ![]() Before beginning any work on this equipment, review the general
safety precautions and procedures in TB 385-4, Safety Precautions
for Maintenance of Electrical and Electronic Equipment. Do not
work on equipment alone. Be sure that a person capable of ren-
dering first aid is present.
To prevent personal injury when applying or removing steel strapping
on crates or cartons, wear heavy gloves and protective eye glasses.
Do not handle cartons by the steel straps.
Adequate ventilation should be provided while using
TRICHLOROTRIFLUOROETHANE. Prolonged breathing of vapor should be avoided.
The solvent should not be used near heat or open flame; the products of
decomposition are toxic and irritating. Since TRICHLOROTRIFLUOROETHANE
dissolves natural oils, prolonged contact with skin should be avoided.
When necessary, use gloves which the solvent cannot penetrate. If the
solvent is taken internally, consult a physician immediately.
Compressed air shall not be used for cleaning purposes except where
reduced to less than 29 pounds per square inch (psi) and then only
with effective chip guarding and personnel protective equipment. -
Do not use compressed air to dry parts when TRICHLOROTRIFLUOROETHANE
has been used. Compressed air is dangerous and can cause serious
bodily harm if protective means or methods are not observed to
prevent chip or particle (of whatever size) from being blown into
the eyes or unbroken skin of the operator other personnel.
Do not attempt to lift or move the heavy components of the AB-621(*)/G
or MK-2044/G without adequate personnel.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |