CHAPTER 2. INSTALLATION AND OPERATION INSTRUCTIONS

C 2, TM 11-5985-284-15

CHAPTER 2

INSTALLATION AND OPERATION INSTRUCTIONS

Section I. SERVICE UPON RECEIPT OF ANTENNA LOOK AT-784/PRC

2-1. Unpacking

2-2. Checking Unpacked Equipment

a. Packaging Data. When packed for ship-

a. Inspect all equipment for damage possi-

ment, the components comprising Antenna,

bly incurred during shipment. If the equip-

Loop AT-784/PRC, are placed in a corrugated

ment has been damaged, report the damage

cardboard carton. A typical shipping carton

on DD Form 6 (para 1-3b).

and its contents is shown in figure 2-1. The

b. See that the equipment is complete as

dimensions of the carton are 10½ by 6½ by 5

listed on the packing slip, or paragraph 1-6.1.

inches.

Report all discrepancies in accordance with

b. Removing Contents. To unpack, proceed

AR 735-11-2. Shortage of a minor assembly or

as follows: Open the carton, lift out Bag, Cot-

part that does not affect proper functioning of

ton Duck CW-445/PRC, remove its contents,

the AT-1082/PRC should not prevent use of

and check the components (para 2-2, and para

the equipment.

NOTE

2-3.

Installation

To install Antenna AT-1082/PRC, follow the

Save the original packing carton. It

procedures in a through e below.

can be used again when the equip-

a. Remove the AT-1082/PRC from the

ment is repacked for storage or

CW-445/PRC (carrying bag).

shipment.

Figure 2-1. Packaging of Antenna, Loop AT-784/PRC.

2-1