WARNING

WARNING

Be extremely careful when working around the antenna or the antenna terminals. RADIO FREQUENCY HIGH VOLTGES

EXIST AT THE TERMINALS. Operator and maintenance personnel should be familiar with the requirements of TB SIG

291 before attempting installation or operation of the equipment covered in this manual. Failure to follow requirements of

TB SIG 291 could resulting injury or DEATH.

CAUTION

The coupler unit in the AS-2285/ARC contains transistorized circuits. To avoid transistor damage always disconnect the

equipment from the power source when making cable connections. Check the battery voltage before making connections.

TRANSISTORS AND PRINTED CIRCUITRY MAY BE PERMANENTLY DAMAGED BY IMPROPER VOLTAGE. 5

SAFETY STEPS TO FOLLOW IF SOMEONE IS THE VICTIM OF ELECTRICAL SHOCK

1) DO NOT TRY TO PULL OR GRAB THE INDINVIDUAL

2) IF POSSIBLE, TURN OFF THE ELECTICAL POWER

3) IF YOU CANOT TURN OFF THE ELECTRICAL POWER, PULL, PUSH, OR LIFT THE PERSON TO SAFETY UNING

A WOODEN POLE OR A ROPE OR SOME OTHER INSULATING MATERIAL

4) SEND FOR HELP AS SOON AS POSSIBLE

5) AFTER THE INFURED PERSON IS FREE OF CONTACT WITH THE SOURCE OF ELECTRICAL SHOCK, MOVE

THE PERSON A SHORT DISTANCE AWAY AND IMMEDIATELY START ARTIFICIAL RESUSCITATION