CONTINUE SECOND WIRE 3RD

TB 11-5820-1148-10

5.7

Turn outward and face the load resistor in the outer antenna element wire. Unroll wire while walking

toward that outer resistor. The snap link end will appear, with only a drop lead and the number 4 on

the white band. Put the spool down and connect the snap ring to the bottom (downstream) side of the

resistor strong point. Now connect the upstream spade lug and then the two downstream spade lugs at

the binding post connections on the resistor (one upstream, and two downstream). Return to the base

of the antenna mast.

5.8

LAY OUT THIRD WIRE

Take the next wire element (#3-4) at the #3 point and secure it to the mast or balun as you did for the

#1-2 wire. Both personnel should pick up another resistor, and a plain 15-inch stake, and begin walking

in opposite directions to each other at about a 20-degree angle off to one or the other side of the

center wire.

1-19