 |
|||
|
|
|||
|
Page Title:
Figure 3-7. Light witch, removal and installation, |
|
||
| ||||||||||
|
|
  TM 5-4110-204-13
Figure 3-7. Light witch, removal and installation,
b. Installation,
remove the conveyor door canopy.
conveyor door latdh.
b. Installation. Refer to figure 312, and
(2) Refer to figure 3-10, and install the
install the conveyor door canopy.
conveyor door handle.
NOTE
3-25. Conveyor Door Roller
On the 600-cu. ft., Type I units (FSN
I
The 1800J model refrigeratar does not have a
4110269-5096) and the 1800J unit
conveyor door roller.
(FSN 4110-287-3161 ), all panel gas-
a. Removal. Refer to figure 310, and re-
kets are attached with staples in place
move the conveyor door roller.
of retainers and retainer screws. To
remove gaskets, pry out staples with
stall the conveyor door rollers.
a common screwdriver. Attach new
3-26. Conveyor Door Curtain
gaskets with staples (0.63 x 1/2 x 5/8
in. ) spaced 2 1/2 inches apart.
a. Removal. Refer to figure 310, and re-
move the conveyor door curtain,
3-28. Refrigerator Panel and Door Gaskets
b. Installation. Refer to figure 310, and
install the conveyor door curtain.
move the panel and door gaskets.
3-27. Conveyor Door Canopy
b. Installation. Refer to figure 3-13, and
The 1800J model refrigerator does not have a
I door canopy.
install the panel or door gaskets.
Change 2
3-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals