Figure 16. Generator Set Exhaust Exhaust Removal/Installation

Page Title: Figure 16. Generator Set Exhaust Exhaust Removal/Installation
Back | Up | Next

Web
www.tpub.com

Home

Information Categories

....

Back
Figure 15

Up
MWO-55-8115-202-40-1 Modification of the Shipping and Storage Container Refrigerated Model SC209 Roller Slide and Exhaust Kit Installation Manual

Next
Figure 17B

MWO 55-8115-202-40-1

(23) Remove the exhaust flap from 10kW TQG generator with a 5/16" socket & drive, or wrench

as shown in Figure 17A and thread on exhaust pipe as shown in Figure 17B. Replace exhaust

flap after pipe installed. Reference TM 55-8115-202-14, change 5, Paragraph 4-69, Figure 4-16.

Figure 16. Generator Set Exhaust

Exhaust Removal/Installation