|
| |
Back
Figure 10. Inspection Area No. 9 (Sheet 1 of 2) | Up
TM-1-1520-238-PMS 10 Hour /14 Day Inspection Checklist for Army
AH-64 Helicopter Manual | Next
Figure 10. Inspection Area No. 9 (Sheet 2) |
“FOD REMINDER”
Check work area for tools and parts after completion of maintenance and inspection
TM 1-1520-238-PMS
C 6
71
Seq.
No.
Location
Item and Procedure
ENGINE NACELLE – LEFT
POWER OFF
9.1
–––
Exterior Surfaces
Skin areas for cracks and distortion
Loose or missing hardware
Access panels, doors, and fairing for mounting security
9.2
1
IR Suppressor and Exhaust Nozzles
Cracks, distortion, corrosion, and mounting security
Loose or missing hardware
Obstructions and cleanliness
Check secondary exhaust nozzle gasket for deformation or not fully seated against secondary nozzle frame
9.3
2
Open Electronics Equipment Access Door L295
Interior panels for cracks and cleanliness
Loose or missing hardware
Interior components for physical damage and mounting security
Electrical connectors for security
Maintenance and inspection light for proper stowage
9.4
3
AFT FUEL VENT AND LIGHTNING ARRESTOR
OBSTRUCTIONS AND CLEANLINESS
9.5
4
FIRE EXTINGUISHER DISCHARGE DISC
BLOW-OUT INDICATION
|
