|
| |
Back
Figure 6. Inspection Area No. 5 (Sheet 3) | Up
TM-1-1520-238-PMS 10 Hour /14 Day Inspection Checklist for Army
AH-64 Helicopter Manual | Next
VERTICAL STABILIZER |
“FOD REMINDER”
Check work area for tools and parts after completion of maintenance and inspection
TM 1-1520-238-PMS
C 3
45
Seq.
No.
Location
Item and Procedure
5.9
–––
INTERMEDIATE GEARBOX (Stabilizer fairing R510 and L510 removed)
CAUTION
Do not use tail rotor control pushrods as hand-holds.
Interior panels and structure for cracks and cleanliness
Loose or missing hardware
10
GEARBOX HOUSING FOR GREASE LEAKAGE AND SECURITY
Breather for lubricant buildup
Electrical connectors for security
Hydraulic connectors for security (deck and stabilizer base areas)
Visible wiring for chafing or damaged insulation and connection security
Hydraulic lines for leakage and chafing
11
GEARBOX MOUNTING BASE FOR CRACKS
12
FAN AND SHROUD FOR CRACKS, DISTORTION, AND RUB MARKS
13
TAIL ROTOR CONTROL BELLCRANK, BALANCE WEIGHT AND VERTICAL PUSHROD FOR CRACKS,
DISTORTION, SECURITY, AND ALINEMENT
14
HORIZONTAL PUSHROD FOR CRACKS, DISTORTION, AND SECURITY
PUSHROD END JOINT FOR LOOSENESS (NO MOVEMENT PERMITTED WHEN SHAKEN BY HAND)
15
CONNECTOR P124/J124 FOR SECURITY
|
