|
| |
Back
Figure 6. Inspection Area No. 5 (Sheet 1 of 4) | Up
TM-1-1520-238-PMS 10 Hour /14 Day Inspection Checklist for Army
AH-64 Helicopter Manual | Next
STABILATOR ACTUATOR |
“FOD REMINDER”
Check work area for tools and parts after completion of maintenance and inspection
TM 1-1520-238-PMS
C 1
39
Seq.
No.
Location
Item and Procedure
TAIL SECTION
POWER OFF
5.1
–––
Exterior Surfaces
Skin areas for cracks and distortion
Loose or missing hardware
Access panels and fairings for mounting security
Visible wiring for chafing, damaged insulation, and connection security
Hydraulic lines for leakage, chafing, and connector security
5.2
1
HORIZONTAL STABILATOR
ATTACHMENT AND PIVOT SECURITY
BOSSES AND PIVOTS FOR CRACKS, DISTORTION, CORROSION, AND CLEANLINESS
5.3
–––
STABILATOR PIVOT POINTS
PIVOT BUSHINGS FOR PLAY BY LIGHTLY PULLING UP AND DOWN, FORWARD AND AFT AT POINTS A
AND B
STATIC DISCHARGE FOR EXPOSED WICK
|
