|
| |
Back
Figure 2. Inspection Area No. 1 (Sheet 2) | Up
TM-1-1520-238-PMS 10 Hour /14 Day Inspection Checklist for Army
AH-64 Helicopter Manual | Next
Figure 3. Inspection Area No. 2 (Sheet 1 of 6) |
“FOD REMINDER”
Check work area for tools and parts after completion of maintenance and inspection
TM 1-1520-238-PMS
C 3
11
Seq.
No.
Location
Item and Procedure
1.6
4
MAIN LANDING GEAR SHOCK STRUT
CRACKS, DISTORTION, AND CORROSION
STRUT TOP AND BOTTOM MOUNTS FOR SECURITY AND ALINEMENT
FLUID LEAKAGE ON STRUT EXTERIOR
STRUT EXTENSION FOR NORMAL HELICOPTER GROUND ATTITUDE
Clean exposed piston rod with lubricating oil (VVL800A)
5
LOCKING SHEAR COLLAR IN LOCKED POSITION (RED STRIPE VISIBLE AND LOCK PIN INSTALLED)
COLLAR FOR CRACKS
1.7
6
MAIN LANDING GEAR TRAILING ARM
ARM AND STEP FOR CRACKS, DISTORTION, AND SECURITY
LOOSE OR MISSING HARDWARE
1.8
7
MAIN LANDING GEAR WHEEL
CRACKS AND DISTORTION
TIRE FOR BLISTERS, CUTS, WEAR, AND PROPER INFLATION
HUB FOR GREASE LEAKAGE
AXLE NUT FOR SECURITY
WHEEL NUTS FOR CRACKS
8
BRAKE HOUSING FOR CRACKS, HYDRAULIC FLUID LEAKAGE, AND MOUNTING SECURITY
Hydraulic brake lines for chafing, leakage, and security
1.9
9
Search Light
Stowed-position
Lens for cracks and mounting security
|
