TM 1-1520-238-PM 2–18 PHASE NO. Area Name and No. CREW STATIONS – 2 Aircraft Serial No. Date Inspect Phase Nos. Inspection Requirements Status Faults and/or Remarks Action Taken Initial 2,4 24. CPG engine power controls for bent, cracked, or broken cable supports and C brackets. Rods and rod ends for loose or worn bearings and loose or missing hardware. Check power quadrant detent operation. Remove CPG left console side panels for interior access. 2,4 25. CPG flight control linkage for cracks, corrosion, and security. C Remove floor panels for access. wiring harness for loose missing 2,4 26. CPG wiring harness for loose or missing hardware   chafed wires   loose hardware, chafed wires, loose wraps C connections, and broken tie-wraps. Brackets for damage or corrosion. p Remove CPG console side    anels for access. ALL 27. CPG SSU mount for strut failure, and loose or missing hardware. “FOD REMINDER” Check work area for tools and parts after completion of maintenance and inspection.