c. Instruments – MonitoR

TM 1-1520-238-MTF Change 3 2-58 PROCEDURE TROUBLESHOOTING REFERENCE STARTING ENGINES – PILOT (CONT) NOTE Use the procedures in steps 9.a. thru 9.i. for COLD and WARM engine starts and for COLD engine starts (more than 4 hours since last shutdown) and all IN- FLIGHT and engine starts. Use the procedures in steps 9.j. thru 9.(4) for WARM engine starts on the GROUND. b. START switch – START. NOTE During engine start the amber X FEED cau- tion/warning lights will illuminate if the CROSSFEED switch is not in the AFT TK position (modified caution/warning panels). c. Instruments – Monitor. d. PWR lever – IDLE after N_G speed increases and TGT is below 150 °C . e. Clock – Start. f. Engine oil pressure – Verify increasing within 45 seconds after moving PWR lever to IDLE.