|
| |
Back
AFTER STARTING APU (CONT) | Up
TM-1-1520-238-MTF Maintenance Test Flight Manual Helicopter Attack
AH-64A Apache | Next
AFTER STARTING APU (CONT) |
TM 1-1520-238-MTF
2-49
PROCEDURE
TROUBLESHOOTING
REFERENCE
AFTER STARTING APU (CONT)
(19) ORT WAS – Deselect MSL.
(20) MSL select switch – OFF.
d. Pilot MASTER and CPG
ARM/SAFE switches – OFF.
e. Weapons select switches – OFF.
f. PLT/GND ORIDE switch – OFF.
**26. Flight Controls – Check as follows:
CAUTION
Ensure both pilot and CPG control
locks are removed and that both pilot
and CPG collective friction is off.
*a. Stabilator system – Check as
follows:
(1) Perform FD/LS test 12. Verify
RTR BK caution/warning
segment illuminates. Leave
RTR BK switch at BRAKE.
(2) CPG stabilator controls –
Check operational, then reset.
*b. DASE system – Check as follows:
(1) Controls – Friction off, centered
and cleared.
(2) FORCE TRIM – OFF.
|
