|
| |
Back
CPG WINDSHIELD WIPER CONVERTER REPLACEMENT | Up
TM-1-1520-238-23-8 Army Model AH-64 Helicopter (NSN
1520-01-106-9519) (EIC: RHA) Manual | Next
CPG WINDSHIELD WIPER CONVERTER REPLACEMENT - continued |
TM 1-1520-238-23
12-39
12.12.
CPG WINDSHIELD WIPER CONVERTER REPLACEMENT - continued
c. Remove wiper converter (1) from airframe (2).
(1) Remove sealing compound from cover (3),
converter shaft (4), pivot stud (5), and four
screws (6) (para 1.47).
(2) Remove four screws (6) and washers (7).
(3) Remove cover (3) from airframe (2).
NOTE
The coupling can fall out when flex shaft
is removed.
d. Remove wiper flex shaft (8) from wiper con-
verter (1).
(1) Remove lockwire from converter (1) and nut
(9).
(2) Remove nut (9) and coupling (10) from con-
verter (1).
(3) Remove flex shaft (8).
(4) Install protective cap (11) on nut (9).
e. Remove adapter (12) from converter (1).
(1) Hold four screws (13).
(2) Remove four nuts (14) and washers (15).
(3) Remove adapter (12) from converter (1).
(4) Discard converter (1).
12.12.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
b. Clean sealing compound from adapter, cover,
and airframe (para 1.47).
GO TO NEXT PAGE
M04-962-3
2
1
7
3
10
8
9
11
6
4
5
M04-962-4
13
14
15
1
12
|
