|
| |
Back
PILOT WINDSHIELD WIPER MOTOR REPLACEMENT | Up
TM-1-1520-238-23-8 Army Model AH-64 Helicopter (NSN
1520-01-106-9519) (EIC: RHA) Manual | Next
PILOT WINDSHIELD WIPER MOTOR REPLACEMENT - continued |
TM 1-1520-238-23
12-23
12.7.
PILOT WINDSHIELD WIPER MOTOR REPLACEMENT - continued
NOTE
The coupling can fall out when flex shaft
is removed.
c. Remove wiper flex shaft (1) from wiper motor
(2).
(1) Remove lockwire from motor (2) and nut (3).
(2) Remove nut (3) and coupling (4) from motor
(2).
(3) Install protective cap (5) on nut (3).
d. Remove motor (2) and mounting plate (6) from
bracket (7).
(1) Remove sealant from screw (8), washer (9),
and lead (10) (para 1.47).
(2) Remove screw (8), washer (9), and lead (10).
(3) Remove three screws (11) and washers (12).
(4) Remove motor (2) and plate (6).
e. Detach connector P289 (13) from receptacle
(B4)J1 (14).
f. Remove plate (6) from motor (2).
(1) Remove lockwire from four bolts (15).
(2) Remove four bolts (15) and washers (16)
from plate (6).
(3) Remove plate (6).
GO TO NEXT PAGE
9
5
2
1
3
4
M04-968-3
6
7
3
8
10
M04-968-4
2
11
14
13
12
6
7
M04-968-5
6
15
16
2
|
