|
| |
Back
PILOT WINDSHIELD WIPER FLEX SHAFT REPLACEMENT - continued | Up
TM-1-1520-238-23-8 Army Model AH-64 Helicopter (NSN
1520-01-106-9519) (EIC: RHA) Manual | Next
PILOT WINDSHIELD WIPER FLEX SHAFT REPLACEMENT - continued |
TM 1-1520-238-23
12-20
12.6.
PILOT WINDSHIELD WIPER FLEX SHAFT REPLACEMENT - continued
12.6.6. Installation
a. Install sleeving (13) on new flex shaft (1).
(1) Install sleeving (13) on flex shaft (1).
(2) Secure sleeving (13) with two straps (14).
Use strap (item 193, App F).
NOTE
To ensure proper installation of flex shaft,
coupling must be installed between flex
shaft and converter fitting.
b. Install flex shaft (1) on converter (5) and cano-
py frame (6). Torque nut (7) to 100 INCH-
POUNDS.
(1) Install flex shaft (1) through access hole (12).
(2) Install coupling (8) and nut (7) on converter
(5).
(3) Torque nut (7) to 100 INCH-POUNDS. Use
torque wrench.
(4) Lockwire nut (7) to converter (5). Use wire
(item 229, App F).
(5) Install clamp (10) on flex shaft (1).
(6) Install screw (9) through clamp (10) and
spacer (11) on canopy frame (6).
GO TO NEXT PAGE
M04-964-4
5
6
7
1
8
11
10
9
14
13
12
|
