|
| |
Back
CPG COLLECTIVE STICK POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER (LVDT) ROD END REPLACEMENT | Up
TM-1-1520-238-23-7-2 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
CPG COLLECTIVE CONTROL POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER (LVDT) REMOVAL |
TM 1-1520-238-23
11-883
11.202.
CPG COLLECTIVE STICK POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER (LVDT)
ROD END REPLACEMENT – continued
11.202.6. Installation
a. Install jam nut (8) on rod end (1).
b. Install LVDT rod end bearing (1) on bracket (2).
Torque nut (4) 14 to 18 INCH-POUNDS.
(1) Aline rod end (1) with bracket (2).
(2) Install bolt (6) through washer (7), bracket (2),
rod end (1) and bushing (5).
(3) Check fit of self–retaining bolt (6) (para 11.1).
(4) Install nut (4) on bolt (6). Torque nut (4) to 14
INCH-POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 18 INCH-POUNDS.
(6) Install new cotter pin (3).
c. Inspect (QA).
d. Install CPG collective control position LVDT
(para 11.204).
END OF TASK
6
2
7
1
3
4
5
8
M04-5072-2
|
