|
| |
Back
ASE PANEL CIRCUIT CARD ASSEMBLY (CCA) REPLACEMENT (AVIM) – continued | Up
TM-1-1520-238-23-7-2 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
CPG DIRECTIONAL CONTROL POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER (LVDT) REMOVAL |
TM 1-1520-238-23
11-860
11.195.
ASE PANEL CIRCUIT CARD ASSEMBLY (CCA) REPLACEMENT (AVIM) – continued
11.195.6. Installation
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
a. Install card (2) on panel (7).
(1) Solder identified wires (10) to terminals (11).
Use soldering iron and solder (item 189,
App F) (TM 55-1500-323-24).
(2) Aline card (2) with three posts (9).
(3) Install three screws (8) through card (2) into
posts (9).
b. Install receptacle J1 (1) on panel card (2)
(1) Aline holes of receptacle J1 (1) with holes on
card (2).
(2) Install two screws (5) through washers (6),
connector (1), and card (2).
(3) Install two washers (4) and nuts (3).
c. Inspect (QA).
END OF TASK
M04-3443-3
2
8
11
7
10
9
1
M04-3443-4
34
6
5
2
|
