|
| |
Back
LATERAL BELLCRANK AND LATERAL LINKS INSTALLATION – continued | Up
TM-1-1520-238-23-7-1 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
LATERAL BELLCRANK AND LATERAL LINKS INSTALLATION – continued |
TM 1-1520-238-23
11-78.4
Change 4
11.11.
LATERAL BELLCRANK AND LATERAL LINKS INSTALLATION – continued
CAUTION
Threads of bolt and nut shall be clean
and compound free. Contaminated
threads can cause improper torque,
which may cause damage to flight control
system.
(4) Apply a light coat of corrosion preventive
compound to shank of bolt (21). Use
corrosion preventive compound (item 62A,
App F).
(5) Install bolt (21) through washer(s) (22), (if re-
quired) and force alinement bolt (18.1) out of
bellcrank (18).
(6) Check fit of self-retaining bolt (21) (para
11.1).
e. Install nut (23) on bolt (21). Torque nut (23) 75
to 91 FOOT-POUNDS.
(1) Hold bolt (21). Use box wrench.
(2) Install nut (23).
(3) Torque nut (23) to 75 FOOT-POUNDS. Use
socket and torque wrench.
(4) Increase torque to aline cotter pin hole, but do
not exceed 91 FOOT-POUNDS.
(5) Install new cotter pin (24).
(6) Apply sealing compound around bolt (21)
head, washer (22), and nut (23). Use sealing
compound (item 176, App F).
GO TO NEXT PAGE
21
18.1
M04-1716-25
18
22
23
M04-1716-18A
24
VIEW
ROTATED
22
21
|
