|
| |
Back
LONGITUDINAL AND COLLECTIVE BELLCRANKS REMOVAL/INSTALLATION | Up
TM-1-1520-238-23-7-1 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
LONGITUDINAL AND COLLECTIVE BELLCRANKS REMOVAL/INSTALLATION – continued |
TM 1-1520-238-23
11-64
Change 2
11.9.
LONGITUDINAL AND COLLECTIVE BELLCRANKS REMOVAL/INSTALLATION – continued
11.9.3. Removal
a. Remove longitudinal bellcrank (1) and collec-
tive bellcrank (2) from left mixer support (3).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (4).
(3) Hold bolt (5). Loosen nut (6). Use open end
wrench and socket.
(4) Press retention device (7).
(5) Remove nut (6) and washer (8). Use open
end wrench and socket.
NOTE
Do not remove right mixer support bolt
until left bolt is to be removed.
b. Remove bellcranks (1) and (2) from right mix-
er support (9).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (10).
(3) Hold bolt (11). Loosen nut (12). Use open end
wrench and socket.
(4) Press retention device (13).
(5) Remove nut (12) and washer (14). Use open
end wrench and socket.
GO TO NEXT PAGE
4
1
5
2
3
7
8
6
VIEW
ROTATED
M04-1727-2
1
2
3
9
13
14
12
10
11
VIEW
ROTATED
M04-1727-3
2
9
1
|
