|
| |
Back
FORWARD FUEL CELL AFT FUEL QUANTITY TRANSMITTER REMOVAL/INSTALLATION – continued | Up
TM-1-1520-238-23-6 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
FORWARD FUEL CELL AFT FUEL QUANTITY TRANSMITTER REMOVAL/INSTALLATION – continued |
TM 1-1520-238-23
10-28
Change 2
10.6.
FORWARD FUEL CELL AFT FUEL QUANTITY TRANSMITTER
REMOVAL/INSTALLATION – continued
10.6.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
10.6.5. Inspection
a. Check removed and attaching parts for cracks
and corrosion (para 10.1).
b. Check fuel quantity transmitter wire harness
for cuts, nicks, and fuel seepage. None al-
lowed.
10.6.6. Adjustment
a. Adjust sensor (17) to 5.60 INCHES.
(1) Loosen two clamps (36).
(2) Measure from upper surface of flange (29) to
lower surface of sensor (17).
(3) Move sensor (17) to 5.60 INCHES from top of
flange (29).
(4) Tighten two clamps (36).
10.6.7. Installation
CAUTION
Jet fuel will cause external surface of fuel
cell to swell, delaminate, and leak if al-
lowed to contact the fuel cell more than
72 HOURS. Keep jet fuel away from the
outside of fuel cells.
GO TO NEXT PAGE
M04-326-13A
36
17
29
3
5.60 IN
|
