|
| |
Back
AFT HANGER BEARING AND SUPPORT REMOVAL/INSTALLATION – continued | Up
TM-1-1520-238-23-4 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
AFT HANGER BEARING AND SUPPORT REMOVAL/INSTALLATION – continued |
TM 1-1520-238-23
6-54
Change 1
6.10.
AFT HANGER BEARING AND SUPPORT REMOVAL/INSTALLATION – continued
6.10.4. Cleaning
a. Clean removed and attaching parts and surfaces (para 1.47).
6.10.5. Inspection
NOTE
Unless otherwise specified, the following inspection procedures apply to aft hanger bearing and support
and forward end of No. 5 tail rotor drive shaft.
a. Check for cracks. None allowed.
b. Check for corrosion (para 1.49).
c. Check for nicks and scratches (para 6.1).
NOTE
The following inspection procedures apply to forward end of No. 5 tail rotor drive shaft only.
d. Check for dents (para 6.1).
e. Check for loose or damaged nutplates (para 6.1).
GO TO NEXT PAGE
|
