|
| |
Back
ENGINE TEARDOWN – NO. 1 ENGINE WIRING REMOVAL – continued | Up
TM-1-1520-238-23-3 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
ENGINE TEARDOWN – NO. 1 ENGINE WIRING REMOVAL – continued |
TM 1-1520-238-23
4-49
4.17.
ENGINE TEARDOWN – NO. 1 ENGINE WIRING REMOVAL – continued
d. Remove wire harness support clamps (18)
and (19) from sensing tube (20).
(1) Hold screw (21). Remove nut (22) and wash-
er (23).
(2) Remove screw (21) from clamp (19), spacer
(24), and clamp (18).
e. Remove wire harness support clamps (25)
and (26) from drain manifold (27).
(1) Hold screw (28). Remove nut (29) and wash-
er (30).
(2) Remove screw (28) from clamp (26), spacer
(31), and clamp (25).
f. Remove wire harness support clamps (32)
and (33) from sensing tube (20).
(1) Hold screw (34). Remove nut (35) and wash-
er (36).
(2) Remove screw (34) from clamp (33), spacer
(37), and clamp (32).
g. Remove wire harness support clamps (38)
and (39) from engine regulator valve tube (40).
(1) Hold screw (41). Remove nut (42) and wash-
er (43).
(2) Remove screw (41) from clamps (39) and
(38).
h. Detach connector P35 (44) from starter recep-
tacle A3 (45).
(1) Remove lockwire.
i. Detach connector P39 (46) from starter regu-
lator valve receptacle L3 (47).
(1) Remove lockwire.
GO TO NEXT PAGE
23
19
18
24
22
20
21
20
37
36
33
34
32
35
30
27
25
28
31
26
29
M04-1335-3
47
46
44
45
39
38
41
40
43
42
M04-1335-4
|
