|
| |
Back
NO. 1 ENGINE REMOVAL – LOWER DISCONNECTION | Up
TM-1-1520-238-23-3 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual | Next
NO. 1 ENGINE REMOVAL – REMOVE FROM HELICOPTER |
TM 1-1520-238-23
4-25
4.6.
NO. 1 ENGINE REMOVAL – LOWER DISCONNECTION – continued
4.6.3. Removal
a. Remove starter air tube (1) from coupling (2).
(1) Loosen two clamp screws (3).
(2) Slide coupling (2) aft until tube (1) is clear.
b. Remove bleed air tube (4) from coupling (5).
(1) Loosen two clamp screws (6).
(2) Slide coupling (5) aft until tube (4) is clear.
c. Remove drain hose (7) from elbow (8).
(1) Hold elbow (8). Remove nut (9).
d. Remove drain tube (10) from fitting (11).
(1) Hold fitting (11). Remove nut (12).
e. Remove quick release pin (13) from aft lower
engine mount (14).
(1) Push release button (15). Remove pin (13).
f. Remove support pin (16) from forward lower
engine mount (17).
(1) Lift spring clip (18) to unlock pin (16) and turn
bolt (19) counterclockwise to its internal stop.
(2) Remove support pin (16) from mount (17).
g. Remove two quick release pins (20) from
mount (17).
(1) Push release button (21). Remove pin (20).
GO TO NEXT PARAGRAPH
M04-1003-20
1
2
3
3
4
5
6
6
7
9
8
11
12
10
M04-1003-21
15
13
14
M04-1003-22
20
17
16
19
18
21
M04-1003-23
|
