ACCESS PROVISIONS – INSPECTION/REPAIR

TM 1-1520-238-23 2-12.2 Change 4 2.1. ACCESS PROVISIONS – INSPECTION/REPAIR – continued NAME/ ACCESS NO. ACCESS TO PART NUMBER NSN CATEGORY Fairing L140 Ammunition Feed Mechanism (fwd) 7-311150140-153 III Fairing T205R Main Rotor Shaft 7-311150115-30 III Fairing T205L Main Rotor Shaft 7-311150115-29 III Panel R200 Main Rotor Transmission 7-311150112-56 III Panel L200 Main Rotor Transmission 7-311150112-55 III Fairing R410 Tail Rotor Drive Shaft 7-311150130-45 III Fairing R475 Tail Rotor Drive Shaft 7-311150131-47 III Fairing L530 Vertical Stabilizer, Leading Edge 7-311122622-51 III Fairing T355 Tail Rotor Shaft 7-311150110-43 III Door T250R Deck Area 7-311150146-91 III Door T250R Deck Area 7-311150146-89 III (d) General Conductive Coating (Silver Paint) Criteria. NOTE Black silver oxide is acceptable with silver conductive paint. Black silver oxide occurs with the silver pigment in conductive paint and is highly conductive. Removal of black silver oxide is not required. 1 Contaminates on or near edges such as fuel, oils and dirt must be cleaned to prevent coating of gaskets and conductive paint. 2 Cracks for peeling of conductive coatings must be repaired by cleaning and re-coating of the damaged areas. Cuts or scratches that do not penetrate through the conductive coating is permis- sible.