SPECIAL TOOLS, JIGS AND FIXTURES REQUIRED.

TB 1-1520-238-30-19

12. SPECIAL TOOLS, JIGS AND FIXTURES REQUIRED.

12.1 Special Tools Required.

Tool Number

Nomenclature

3210684-1

Clutch Bearing Tool Kit

298171-1

Splined Output Adapter Holder

298168-1

Spanner Wrench

298166-1

Bearing Installation Driver

298170-1

Seal Forming Tool

298169-1

Seal Installation Tool

3210685-3

Modified Punch

3210688-1

Bearing Plate

296844-1

Holding Fixture

3210689-1

Modified Center Punch

298530-5

Press Tool

2159-3017

Micing Bar

13. APPLICATION.

13.1 Category of Maintenance. AVIM.

13.2 Time Required.

13.2.1 Total of 1 person to inspect, 2 persons to perform disassembly and assembly.

13.2.2 Estimated man-hours to accomplish this task is 4 hours.

13.3 TB/MWO/ECP to be applied prior to or concurrently with this Technical Bulletin: None.

13.4 Publications which require change as a result of this inspection/technical bulletin: Not applicable.

13.5 Deferred Maintenance to be accomplished concurrently with this inspection: As required.

14. REFERENCES.

14.1 TM 1-1520-238-23, Aviation Unit and Intermediate Maintenance Manual, Army Model AH-64A Heli-

copter.

14.2 TM 1-1500-204-23 General Aircraft Maintenance Manual.

14.3 TM 55-1500-344-23 Aircraft Weapon Systems Cleaning and Corrosion Control.

14.4 TM 1-1520-Longbow/Apache Interactive Electronic Technical Manual (IETM) for Longbow/Apache.

15. RECORDING AND REPORTING REQUIREMENTS.

15.1 Reporting compliance suspense date (aircraft). Upon entering requirements of this Technical Bulletin

on DA Form 2408-13, forward compliance message, the report will cite this Technical Bulletin number, date

of entry in DA Form 2408-13, aircraft mission design series and serial numbers of aircraft in numerical order.

15.2 Task/Inspection Reporting Suspense Date (aircraft). N/A.

15.3 Reporting Compliance Suspense Date (spares). N/A.

15.4 Task/Inspection Reporting Suspense Date (spares). N/A.

15.5 The following forms are applicable and are to be completed in accordance with DA Pam 738-751, dated

15 March 1999.

15.5.1 DA Form 2408-5 Equipment Modification Record (aircraft).

15.5.2 DA Form 2408-13 Aircraft Inspection and Maintenance Record.