Figure 14

TB 1-1520-238-30-19

10.15 Align seal plate assembly (23) anti-rotation pins offset from one "bolt hole" output housing (26) the

weep hole. Ensure clutch gaskets (24) remain aligned with seal plate assembly (23).

10.16 Place large end of seal installation tool (P/N 298169-1, figure 9) over the splined output adapter's (19)

roller bearing cavity. Using arbor press, press splined output adapter (19) through the rotating flange (17)

until firmly seated do not apply excessive force.

10.17 Install six bolts (21) and run down tight (ensuring bearing and seal assembly anti-rotation devices

remain locked in place). Torque bolts (21) to 50 inch-pounds. Torque bolts in a crisscross pattern.

10.18 By hand, install nut (16) onto splined output adapter (19) until tight ensure threads are not stripped

or galled during installation of the nut.

CAUTION

Apply direct pressure downward onto spanner wrench as shown in

10.19 Using spanner wrench (P/N 298168-1, Figure 5), splined adapter holder (P/N 298171-1, Figure 3)

and a calibrated torque wrench, torque nut (16) to 550 inch-pounds.