Click here to make tpub.com your Home Page

Page Title: Lubricate seal (22) with Mobilgrease28
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
 Advancement
 Aerographer
 Automotive
 Aviation
 Construction
 Diving
 Draftsman
 Engineering
 Electronics
 Food and Cooking
 Logistics
 Math
 Medical
 Music
 Nuclear Fundamentals
 Photography
 Religion
   
   

 
Back
Figure 11. Gasket Worksheet		Up
TB-1-1520-238-30-19 Auxiliary Power Unit (APU) Clutch P/N 3886000-5 125 Hour Bearing Replenish or Replace for all AH-64 Aircraft Manual		Next
Figure 12. P/N 298166-2 ­ Bearing Installation Driver

TB 1-1520-238-30-19
10.4.4 Lubricate seal (22) with Mobilgrease28.
10.5 If not previously accomplished, install assembled seal plate assembly (23) onto splined output adapter
with (19) anti-rotation pins facing up.
INSPECTION POINT: VERIFY SEAL IS UNDAMAGED AND IS SEATED
TIGHTLY AGAINST THE SPLINED OUTPUT ADAPTER (19) SEALING
SURFACE.
10.6 Align anti-rotation slot on annular ball bearing (25) with pins on seal plate assembly (23).
INSPECTION POINT: INSURE "V" MARK IS ALIGNED ON ANNULAR
BALL BEARING (25) PRIOR TO INSTALLATION ON SPLINED OUTPUT
ADAPTER (19).
CAUTION
Remove plastic caps prior to assembly operations.
10.7 Align match marks on bearing inner diameter and press annular ball bearing (25) onto splined output
adapter (19).
CAUTION
Ensure output adapter (19) is supported at base of shaft prior to
pressing annular ball bearing (25) onto adapter (P/N 298166-2, Figure
12). Failure to support adapter properly may result in damage to the
splined output adapter (19).
19

Privacy Statement - Press Release - Copyright Information. - Contact Us