Figure 6. P/N 298530-5 Press Tool

TB 1-1520-238-30-19

WARNING

Adequate precautions must be taken to insure that the annular ball

bearing (25) is not contaminated. If any contamination is suspected

reject the bearing and replace with a new bearing.

WARNING

Always exert pressure (press/pull) to the inner race of annular ball

bearing (25). Applying pressure to the outer race may cause damage

to the race or rolling elements or may cause the bearing to separate.

CAUTION

Handling of bearings should be minimized. When handling bearings

it is recommended that personnel wear synthetic rubber gloves. If

rubber gloves are not available, clean (non-shedding) cotton gloves

may be worn.